typewriter-revolution-blog-post-header

The Achilles’ heel of a Brother electric typewriter

by | Jul 11, 2018 | Brother | 18 comments

You may know my theory that every typewriter model, no matter how sophisticated and wonderful, has an Achilles’ heel.

This is certainly true of the Brother Electric 3000, a rather obscure little machine from the ’70s (it’s a Brother type JP-8, for those in the know).

 
As you can see, the carriage return is still manual on this little powered portable, but it does have a repeat spacer and a tabulator. It’s a compact machine with a cover that fits neatly over it.

  

So what is its Achilles’ heel?

Well, I found an Electric 3000 a couple of months ago for sale locally, offered for just $12.95 because it wasn’t working. I figured it was worth it, if only to discover an unfamiliar typewriter model. It hummed as soon as you switched it on, but the keys were completely unresponsive.

When I unscrewed the top plate, I found the reason: it was missing the belt that connects the electric motor to the large wheel that turns the fluted shaft, which in turn activates the typebars.

More precisely, the belt was there, but it had crumbled into unrecognizable flakes of brittle material! You can see those flakes at the left bottom corner of this photo. The two parts that are supposed to be connected by a belt are circled in red.

A wide rubber band was a decent temporary fix, and proved that a lasting belt was just what I needed.

After some poking around on eBay, and with the help of an eBay seller who specializes in these things, I located a flat, 17-inch-circumference belt. I doubt that anyone sells belts like this especially for electric typewriters, but you can find various kinds of small belts made for turntables, film projectors, etc. They may be new old stock.

If you need one just like this, you can buy it here.

The belt slipped right on, and the typewriter was good as new. I put it up for sale at Urban Legend Typewriters and earned some good money for WordPlay Cincy.

But was this just a freak occurrence?

No! Just a few days ago, I got the following e-mail:

I have a beautiful Brother Electric 3000 that has a working motor and carriage but the keys will not strike.  Do you have any hints on what I can do to get it in working order or should I just trash it?

Sure enough, when the owner opened up her Brother, she found the same fragments of a crumbled belt:

A fresh belt is on its way to her, and I hope it will do the trick.

Moral of the story: Hey typewriter manufacturers, use materials that will last for at least 100 years, OK? We’re going to need these things when the Internet collapses!

18 Comments

  1. didaskalos

    That's good work you're doing for people, Richard!

    Reply
  2. Ted

    heh, I dunno that even steel belts would last a century :D

    Reply
  3. Joe V

    PRB was the brand we used for replacement VCR belts, back in the day. Hopefully, as long as belts are available, we can keep these machines humming.

    Reply
  4. John Cooper

    Nice rescue, and major karma points for helping out the other owner of a Brother Electric 3000.

    Reply
  5. Anonymous

    A drive belt is an expected wear item. It is also decently standardized enough not to become unobtanium. Be Wile E. Coyote and have a few industrial supply catalogs around. McMaster-Carr sells flat rubber belts to custom lengths for minimal expense.

    Reply
  6. Ping A

    Kinda like the chassis rubber grommets on Olympia SM3 and SM4.

    Reply
  7. SteveK

    Worth knowing. I wouldnt have thought it was that simple a fix.

    Reply
  8. Mary E

    Great story. It's such a good feeling when you can put a typewriter back into service. You inspired me to pick up a very cute but very messed up Smith Corona electric at a thrift store today.

    Reply
  9. Richard P

    Why not? Smith Premiers from the late 19th century use a steel drawband to pull the carriage, and it usually works as good as new. Even some of the rubber on those early typewriters is surprisingly good.

    Reply
  10. Richard P

    Thanks for the tip. It is true that belts will inevitably wear down sooner or later, but these Brother belts seem really pathetic.

    Reply
  11. Richard P

    That's true. We should probably consider those the Achilles' heels of these otherwise fantastic typewriters.

    Reply
  12. Anonymous

    I had the Brother 3800. I would like to know more about it.

    Reply
  13. Linda

    Ok… how about a power cord for this model 3000? Is it a common cord I could find? Or does it need to be ordered from someone and who??

    Reply
  14. Richard P

    Sorry, I don't know.

    Reply
  15. Nis

    Richard, here's another comment for the "long tail of the internet" file: I recently bid on a Brother 3000 because I was emboldened by this post. I unpacked it this morning and sure enough, the drive belt was shot. Happily, five years later, your link to the replacement still works! The new part is in the mail and soon one more disabled machine will be returned to the land of the living. Thanks so much for this.

    Reply
    • Richard Polt

      This is the kind of thing that makes me happy to be part of the typosphere.

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

VISIT THE

typewriter revolutionary factory logo

Contact

Email

Address

Dept. of Philosophy
Xavier University
3800 Victory Pkwy.
Cincinnati, OH. 45207
USA

TYPEWRITER REVOLUTION on instagram
TYPEWRITER REVOLUTION on facebook