Smith-Corona Coronamatic 2200

by | Jan 21, 2019 | electric, Smith-Corona | 22 comments

I suppose I should have taken a “before” picture of this machine that came in for service at Urban Legend Typewriters. It was simply covered in grime and hair. Nauseating! Plus, I am not immediately attracted to ’70s design, so my initial reaction was negative.

Happily, the grime melted off with some judicious application of precious Scrubbing Bubbles Bathroom Cleaner. (It has been discontinued, but Dave Brechbiel very kindly found some cans and sent them to me.) And when it’s sparkling clean, this is not a bad-looking machine at all. It exemplifies the “turret” design that was tried by several manufacturers in the ’70s (such as Brother with this KMart 300). What I mean is that there is a raised area of the shell just above the typebasket. I imagine some little person riding there at the command post and operating the typewriter like some futuristic rocket fighter.

The colors of this 2200 are also classic ’70s: two tones of brown, with some woody patterns on the name panel. (The back panel is missing on this machine. The dealer’s label was attached by Peter Paul Office Equipment, which has been in business in Cincinnati since 1932.)

After cleaning this machine and fixing a few problems, I find that I admire it. Here are some of its good features:

The top shell (sturdy metal) is attached to the base (plastic) by a couple of hooks that are easily opened. Smart idea.

The carriage release system on both ends of the carriage works very well, and doesn’t have any of the flimsiness of the typical release levers on ’60s and ’70s Smith-Coronas, which often have broken.

There’s a paper injector that’s effective and that cleverly moves the paper bail out of the way when it’s being activated.

The cartridge ribbon system is incredibly easy. You can remove a ribbon and pop in a new one in a matter of seconds. And yes, these cartridges are still made (at least the fabric version)!

Below you see a fabric cartridge, whose ribbon is an endless loop (top), and a one-time-use film cartridge (left). Both kinds of cartridges have a gear hidden in the “barrel of the gun” which advances the ribbon. The film cartridge also has a gear in the bottom center. The typewriter mechanism (bottom right) has two gears, which will engage both kinds of cartridges as needed.

The drive system on this typewriter is refined. There are governors on both the small drive wheel and the large wheel that you see in this picture. (As the wheel spins faster, the centrifugal force spreads a couple of weights outwards, thus preventing any further increase in speed.) The belt is guided in a pretty complex path; I’m not sure of the purpose of all of it, but I’m confident that it was carefully researched.

All told, this is an impressive typewriter that I’m glad I had a chance to work on.


  1. Ted

    Duane over at Phoenix Typewriter also likes these. Sadly, they are doomed by the cartridge. You can get them, but reportedly not many are good.

  2. Indro

    Is there maybe a way to replace only the ribbon inside the cardridge?..diy?
    @Richard: nice work!

  3. Richard P

    I did buy one cartridge, supposedly new, which was dry and faint, but I've gotten a couple of good ones since then.

  4. Richard P

    Thanks. In theory, yes, but it could be tricky. The ribbon inside the cartridge is coiled in a complicated, snaking pattern. It is thinner than conventional ribbons. And opening and resealing the cartridge can be challenging. But none of this is impossible.

  5. Bill M

    Nice looking typewriter. Last time I was in Costco they had skids full of Scrubbing Bubbles Bathroom & Shower cleaner. Or is it an imitation of a once great product like what happened with the real Endust?

  6. Richard P

    Might be a different product, or I might be wrong. There is a whole line of Scrubbing Bubbles products, but I haven't been able to find the classic that I like recently — the stuff that really eats into dirt!

  7. Jacy

    I really love the Smith-Corona electrics, and I have two 2200s, one pica and one elite.

    Problem is the ribbons still. I have had surprising luck with the wd-40 trick and these. Take off the top cover, spray the ribbon and let soak. Then place upside down on paper towel to drain slightly. Hairdryer to fix, and then pop the cover back on.

    Can be a bit fiddly, especially if any of the ribbon pops out of place, but doable. Better than ordering one online to Canada. Would cost me $50 or thereabouts.

    Funny how weak the plastic back covers are. I've seen a half-dozen of them with the pins broken off, and missing the back. Odd, since you pretty well never have to take them off.

  8. Robin Heilschild ????

    I love 70's typewriters! xD
    They look so futuristic… <3

    Unfortunately, there's no place where electric and electronic typewriters can be repaired or refurbished. :(

  9. Indro

    Just found (and got it for free!) a Smith Corona Coronet 12.. Baby Blue.
    Hard to find the electric Smith Corona's.. different power (110V-220V) and working fine. 4 new original cartridges incl..Cool.

  10. LivingMuseum

    Had one of these in grey & black; one of the few electrics I actually liked. The Coronamatic ribbons were a source for trouble, myself and another friend had a different model Smithy electric that used 'em, and being clumsy he broke one open accidentally. What a mess! Not fun to put back together and it never worked quite right again. I eventually sold my machine and the NOS cartridges I had for it, but this was years ago now.

  11. Don's Jupiter Blog

    I had a similar machine in high school. I preferred the manual return so that is what I had but the color scheme on mine was similar. While this machine disappeared in a garage sale some years back, I now have acquired a Smith Corona Coronet Cartridge 12 which will have to satisfy my curiosity for the Coronamatic. Yes, the cartridges are still being made (!!) but I agree the quality can be spotty. Too bad, the Coronamatic was a well designed, well built machine and the idea of the cartridge ribbon was spot on as far as I am concerned.

  12. Unknown

    Hi, I'm looking into getting one for my daughter. Looking into the cartridge issue. It's a shame someone can't set up production.

  13. Nasim

    I was at the dump and I grabbed a 2200 that was about to be buried. An FYI for readers the cartridge has four small clip around the edges. I used a pocket knife and it popped right open. Sprayed down the ribbon with WD40 and now i have some deliciously greasy spattering text. Hopefully a little time and a few rounds of paper should bring it back to acceptable levels.

  14. Anonymous

    You would think that there would be available ink for these ribbons besides WT 40 spray.

  15. Anonymous

    My belt for the motor snapped, where can I find a replacement? Haven’t had success and figured I’d ask.

  16. Richard P

    I use o-rings with dimensions 3-3/4 x 4 x 1/8 inches. They are available from Tork Distributors; they're intended for water filters but work nicely on Smith-Coronas!

  17. Anonymous

    Hello my aunt just gave me her corona smithelectric typewriter. Looks like there is no available ink within my area. Any chance I can use a different brand for the cartridge ink like Brother?

  18. Richard P

    I think you have to use Smith-Corona cartridges. Try looking on Amazon and eBay. Good luck!

  19. Anonymous

    Stamp pad ink works pretty well. Less is more unless you need more then add more, but still less than the more you’re thinking.

  20. Anonymous

    Actually, I just read this kind of ink is actually bad for the typeslugs. So I should correct myself and say less is more only if less indeed means “none.”

    Apparently an oil-based stamp ink is preferred. (Stamp pad ink is water-based, the more you know!)

  21. Anonymous

    I just got a Coronamatic 2200 from a neighbor. My first electric. It seems to work well; types effortlessly – my hands haven't become accustomed to the manuals I've recently acquired, so the electric is a breeze; very similar to computer which is what I've been using for the last 30 years. I haven't cleaned it at all – just plugged it in and started typing. Brief research shows loads of options on Amazon for the Coronamatic cartridge, with a fair number (300+) of positive reviews – so perhaps the cartridges are no longer an issue?


Submit a Comment

Your email address will not be published. Required fields are marked *


typewriter revolutionary factory logo




Dept. of Philosophy
Xavier University
3800 Victory Pkwy.
Cincinnati, OH. 45207