Changing the carbon ribbon on an IBM Model B Executive typewriter

by | Oct 18, 2016 | IBM, ribbons | 8 comments

It’s ribbon-changing time!
I thought readers might enjoy seeing this process, and the documentation may be useful to some as well.
The white line on the right housing for the ribbon is near the top, indicating that the ribbon is almost used up. 
When you pull the housing cover open, you can see that the indicator is actually in the red zone (which was hidden in the shadows in the photo above).
On the left side, the take-up reel is getting very full.
The Executive waits for a fresh ribbon with open arms.
I happen to have a pack of a dozen IBM Electric ribbons which I picked up on eBay a few years ago. To judge from the markings on the cardboard box, these were produced for the military in the 1980s.
Let’s remove the used ribbon.
The ribbon passes between two rollers that can be held apart using the switch I’m pointing to.
The ribbon pulls off.
This is not a private means of communication. The typing is clearly visible. Some business documents were typed on this ribbon in 1984. I bought the machine last month, and I’ve been using it for letters, brainstorms, typecasts, comments on student papers, and more.
I insert the new ribbon through the ribbon vibrator and guides.
Then it goes onto the shaft in the right-hand housing. This is a little tricky because the ribbon is slippery and wants to get tangled if you’re not careful. Note that the indicator is now down at the bottom. On the far side of the ribbon, not visible in this photo, is the other end of the indicator piece, which is pushed out by the fresh ribbon, causing the indicator to move down.

Note that the ribbon should go under the wire that is sticking out in the photo.

I thread the ribbon between the rollers and onto the take-up spool. 
And we’re back in business. Now you just close the left and right covers, and you’re ready to type.


  1. Scott K

    That looks pretty elaborate. Just out of interest, is there any juicy detail on the ribbon? Say… Trump's tax details for example?

  2. Anonymous

    Nice description and photos. I'd like to experience the clean, crisp print of a carbon ribbon at some point. Your Executive is pretty wonderful looking.

  3. TomR

    Very interesting, thanks for this helpful post. Definitely not very user-friendly and obviously designed by those fun-loving engineers at IBM. It's clearly a first step in the evolution from "ribbon spools" to "tape drives" for the print medium, later to be seen in IBM mainframe mag tape drives.

  4. Richard P

    Sadly, everything I saw was boring!

  5. Miguel Chávez

    The same ribbon as in the Executive D, and pretty much the same mechanism, though for some reason I think this one is somewhat more reliable than the later version, judging by how the ribbon tends to get out of the rollers in my "green giant".

  6. Phoenix Typewriter

    Full ribbon spool is NOT FEED CORRECTLY. Needs to be on other side of tension wire protruding. This is critical for proper feeding.

  7. Richard P

    I see! Thanks for catching that. I'll fix it when I next use the typewriter.

  8. Erik Bruchez

    It seems that every Google search finds something on your blog, Richard! Nice to see information about another IBM Executive. I just posted by my "A" in the Facebook group. I have yet to check the text on the ribbon, but my guess is that I won't find anything juicy either.


Submit a Comment

Your email address will not be published. Required fields are marked *


typewriter revolutionary factory logo




Dept. of Philosophy
Xavier University
3800 Victory Pkwy.
Cincinnati, OH. 45207